Legal highs Research Chemicals forum
Sulfur Monochloride - Printable Version

+- Legal highs Research Chemicals forum (http://legal-highs-forum.com)
+-- Forum: Forums (http://legal-highs-forum.com/Forum-Forums)
+--- Forum: Tryptamines (http://legal-highs-forum.com/Forum-Tryptamines)
+--- Thread: Sulfur Monochloride (/Thread-Sulfur-Monochloride)



Sulfur Monochloride - Jennifer - 03-22-2018

General Description:


Synonyms: Sulfur chloride; Sulfur subchloride

OSHA IMIS Code Number: 2320

Chemical Abstracts Service (CAS) Registry Number: 10025-67-9

NIOSH Registry of Toxic Effects of Chemical Substances (RTECS) Identification Number: WS4300000

Department of Transportation Regulation Number (49 CFR 172.101) and Guide: 1828 137

Chemical Description and Physical Properties:

amber to red, fuming, oily liquid with a pungent, nauseating, irritating odor
molecular weight: 135
vapor pressure: 6.8 mm
boiling point: 280°F
melting point: -105°F
Incompatibilities: Peroxides, oxides of phosphorous, organics; water

Exposure Limits
OSHA Permissible Exposure Limit (PEL):

General Industry: 1 ppm, 6 mg/m3

Construction Industry: 1 ppm, 6 mg/m3 Ceiling
American Conference of Governmental Industrial Hygienists (ACGIH) Threshold Limit Value (TLV): 1 ppm, 5.5 mg/m3 Ceiling

National Institute for Occupational Safety and Health (NIOSH) Recommended Exposure Limit (REL): 1 ppm Ceiling

Health Factors
Potential Symptoms: Lacrimation; coughing; eye, skin burns; pulmonary edema

Health Effects: Irritation-Eye, Nose, Throat, Skin---Marked (HE14)

Affected Organs: Respiratory system, skin, eyes

Monitoring Methods used by OSHA
Primary Laboratory Sampling/Analytical Method (SLC1):

sampling media: Midget Fritted Glass Bubbler (MFGB) containing 10 mL Deionized Water
maximum volume: 30 Liters
maximum flow rate: 1.0 L/min (TWA)
minimum time: 5 Minutes
maximum flow rate: 1.0 L/min (Ceiling)
current analytical method: Ion Chromatography; IC
method reference: 2 (OSHA In-house file)
method classification: Not Validated
note: Submit as separate sample. An analysis is performed for total Cl- and reported as the compound.